Table of Contents
Advertisement
FS-2/2E FUNCTIONS
Press SEL to open one of the following
sub menus.
SYSTEM DATE
02/24/02
|
&
|
MOVES CURSOR
EXIT
SYSTEM TIME
16:21:13
|
&
|
MOVES CURSOR
EXIT
Move from field to field using the
FORWARD
Buttons.
Press
and
in the value.
Press EXIT to return to the menu
screen. Regardless of the display, the
file name always remains as follows:
YYYYMMDD-HHMMSS.xxx
(Year-Month-Date-Hour-Minute-
Second).
The date and time form the basis of the FS-2/2E file
naming structure for use of clips on a computer.
On the FS-2/2E, files are identified by TRACK and
VOLUME (disk drive) number on the LCD. For
instance, a file on the FS-2/2E LCD identified as 1-
043 is clip number 43 on Volume (disk) 1.
On a computer, files are identified by their base file
name made up of DATE and TIME. For instance, a
clip named 20050615-210943-01.mov is a clip that
began recording at 9:09:43PM on June 15th. 2005.
NOTE: DATE/TIME is used when creating file
names only. The FS-2/2E does not record this
information into the stream. The FS-2/2E records
the date and time which is in the DV stream sent
from the input source.
OS Version #
2 - 20
and
BACK
INDEX
to scroll through digits
FS-2 and FS-2E Studio DTE Disk Recorders User Guide
Part Number: MANL-0927-03
This selection displays the current FS-2/2E
Operating System (OS) Firmware version.
OS VERSION
3.0.m.032603
EXIT
OS Upgrade
To upgrade operating system (OS) software, you
must download a new .bin file to a FireWire drive on
your computer. The latest version of FS-2/2E
software
can
be
downloaded
www.focusinfo.com/support.
To install new OS software to the FS-2/2E, do the
following:
S
1:
Download software from the Focus
TEP
Website to your local computer.
S
2:
Unzip file using WinZip (Windows) or
TEP
Stuffit (Macintosh) on a computer
system with a FireWire (IEEE-1394)
connection.
S
3:
Rename the unzipped file called
TEP
"XXXX.bin" to "fs2.bin".
S
4:
Connect a FireWire disk drive that has
TEP
been used with the FS-2/2E to the
computer and copy over the file
"fs2.bin".
S
5:
Disconnect the FireWire drive from
TEP
computer and connect it to the
FS-2/2E.
S
6:
Unless you are using the internal the
TEP
FS-2/2E hard disk drive to upgrade
your unit, remove your internal hard
drive before powering on your FS-2/2E.
S
7:
If you are using an external FireWire
TEP
drive attach it to the FS-2/2E 1394 port
labelled "To HDD".
S
8:
Power on FS-2/2E normally.
TEP
S
9:
Enter the FS-2/2E menu and select
TEP
"SETUP".
S
10:
From the SETUP menu, select "OS
TEP
UPGRADE". The following screen
from
http://
Advertisement
Table of Contents
