Configuring Using Ip Setup; Help Menu - NETGEAR PS111W Installation And Reference Manual

Hide thumbs Also See for PS111W:

Table of Contents

NetGear Print Server Manual

you wish to change; then enter or select a new value.

Read Only

Indicates whether or not the Environment Variable is modifiable.

Test page Button Informs the print server to send a test page to the printer. The printout includes print server status

information, which is useful when troubleshooting any printing problems.

Refresh Button

If you suspect that the printer status is not properly updated on the screen, click this button to generate

packets to collect updated printer information.

Cancel Button

Close this pop-up window.

The Help menu has a single item - About - which will display information about the program, as

shown below.

Configuring Using IP Setup

IP Setup is a tool to let you configure the IP address for NETGEAR Print Server in Microsoft

Windows environment. Please see Appendix E for IPSetup utility reference.

With IPSetup tool, you can force an IP address to a NETGEAR Print Server. It sets up the subnet mask

and default gateway as well as disables the DHCP. In this way, you can always get a known and fixed

IP address.

Help - About

Table of Contents