Boot Sequence; Swap Floppy Drive; Boot Up Floppy Seek; Boot Up Numlock Status - MSI ATX BX13 User Manual

Boot From LAN First
During Enabled, if there's a LAN card onboard, the priority from
booting will be from the LAN.

Boot Sequence

This category determines which drive the computer searches first for
the disk operating system (i.e., DOS). The settings are A,C,SCSI/C,A,SCSI/
C,CD-ROM,A/CD-ROM,C,A/D,A,SCSI/E,A,SCSI/F,A,SCSI/SCSI,A,C/
SCSI,C,A/C,LS/ZIP,C only. Default value is A,C,SCSI.

Swap Floppy Drive

Switches the floppy disk drives between being designated as A and
B. Default is Disabled.

Boot Up Floppy Seek

During POST, BIOS will determine if the floppy disk drive installed is
40 or 80 tracks. 360K type is 40 tracks while 760K, 1.2M and 1.44M are all 80
tracks.
Floppy FIFO Control
During Enabled, the FDD disk will perform better.

Boot Up NumLock Status

The default value is On.
On (default)
Off

Gate A20 Option

Normal
Fast(default)
Keypad is numeric keys.
Keypad is arrow keys.
The A20 signal is controlled by keyboard
controller or chipset hardware.
The A20 signal is controlled by port 92 or
chipset specific method.
3-10
®