CHAPTER 3
CHAPTER 3
CHAPTER 3
CHAPTER 3
CHAPTER 3
Boot From LAN First
During Enabled, if there's a LAN card onboard, the priority of
booting will be from the LAN.
Boot Sequence
This category determines which drive the computer searches first for
the disk operating system (i.e., DOS). The settings are A,C,SCSI/C,A,SCSI/
C,CD-ROM,A/CD-ROM,C,A/D,A,SCSI/E,A,SCSI/F,A,SCSI/SCSI,A,C/
SCSI,C,A/C only. Default value is A,C,SCSI.
Swap Floppy Drive
Switches the floppy disk drives between being designated as A and
B. Default is Disabled.
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed is
40 or 80 tracks. 360K type is 40 tracks while 760K, 1.2M and 1.44M are all 80
tracks.
Floppy FIFO Control
During Enabled, the FDD disk will perform better.
Boot Up NumLock Status
The default value is On.
On (default) Keypad is numeric keys.
Off
Gate A20 Option
Normal
Fast(default)
Keypad is arrow keys.
The A20 signal is controlled by keyboard
controller or chipset hardware.
The A20 signal is controlled by port 92 or
chipset specific method.
3-10
®
AWARD
AWARD
BIOS SETUP
BIOS SETUP
AWARD
AWARD
AWARD
BIOS SETUP
BIOS SETUP
BIOS SETUP