Oki B6100n Configuration Manual page 50

C-4 Ethernet Network Interface Card Configuration Guide
Command Option(s)
DEFINE SERVER SUBNET MASK ipmask
HELP option <nothing>
<keyword>
DEFINE SERVICE "name" PORT num
DEFINE SERVICE APPLETALK
"name" option
{EN|DIS}
LAT {EN|DIS}
NETWARE {EN|DIS}
RTEL {EN|DIS}
DEFINE SERVICE BANNER {EN|DIS}
"name" option
BINARY {EN|DIS}
EOJ string
FORMFEED
{EN|DIS}
PSCONVERT
{EN|DIS}
SOJ string
DEFINE SERVICE TCPPORT string
"name" option
TELNETPORT string
Frequently-used Server Commands
Description
Specifies the subnet mask to be used for the
Server. The
format.
Displays a list of top-level (general) Help
topics.
Displays information about the keyword(s)
entered. Multiple keywords must be specified
in the order they occur in a command.
Creates a new service and associates it with
the specified port.
Toggles whether the named service can be
used to service networks running the specified
protocol. RTEL applies to TCP/IP networks.
When Enabled, causes the Server to print a
banner page before jobs.
When Enabled, the Server will not process
data passed through the service. This
characteristic should be enabled when
printing PCL data.
Causes the Server to send an end-of-job string
to the attached device after every job. Enter an
end string or the word none.
When Enabled, causes the Server to append a
formfeed to the end of LPR print jobs.
When Enabled, causes the Server to place a
PostScript wrapper around each job.
Causes the Server to send a start-of-job string
to the attached device before every job. Enter
a start string or the word none.
Specifies a
service. Enter a socket number (4000 to 4999)
or the word none.
Specifies a TCP listener socket for the
service. Unlike TCPport, this option performs
Telnet IAC interpretation on the data stream.
Enter a socket number (4000 to 4999) or the
word none.
must be in n.n.n.n
ipmask
raw TCP listener socket for the