Bitmap Graphics - Oki B6100n Configuration Manual

Bitmap Graphics

Technical Support
Debug
Area to Check
Service Characteristics
Port Counters
Sh ow Ser ver
Ethernet Network Interface Card Configuration Guide
Explanation
Issue the Show Service Characteristics command. If the
service rating is zero, the parallel port is in use. Verify
that the PostScript characteristic and appropriate
protocols have been enabled on the service.
If PostScript jobs appear to print but nothing comes out of
the printer, verify the amount of data sent from the host.
Issue the appropriate print command from the host
system. After the job has completed, use the Show Port 1
Counters command.
Netstat
B-5