Getting Started - Oki B6100n Configuration Manual

DEFAULT
DEFAULT
NOTE: 1. Only available as a menu selection if an IPDS option is installed in the printer.
2. Always available as a menu selection.
3. If AUTO SWITCH is selected the FORMAT selection will automatically be RAW.
4. This is the MAC—the factory-set network address.
5. This is a free format entry that requires your input.

Getting Started

system
NOTE: If you would like to change either the privileged or login password, use EZWebCon.
EZWebCon Configuration
Incoming Logins
in g
Ethernet Network Interface Card Configuration Guide
NETWORK FRAME
AUTO SENSE
802.3
ETHERNET II
802.2 SNAP
802.2
AUTO SENSE
QUEUE SCAN RATE
1 - 255
1
2-5
access
Defin e Ser ver In com-