Oki B6100n Configuration Manual page 28

3-4 Ethernet Network Interface Card (NIC) Installation
Installing the Ethenet Network Interface on the Controller Assembly
NOTE: It is not necessary to remove the controller from your printer to complete the installation. For
clarity, the following illustrations depict a controller removed from the printer. When facing the
front of the controller as shown below, network port 1 is on the right and network port 2 is on the
left. However, when installed in the printer, network port 1 is on the bottom and network port 2 is on
top. In the following few steps, an Ethernet network interface is being installed in network port 2.
1 .
2.