Server Commands - Oki B6100n Configuration Manual

Server Commands

Command Option(s)
DEFINE SERVER BOOTP {EN|DIS}
DEFINE SERVER DHCP {EN|DIS}
DEFINE SERVER GATEWAY ipaddress
DEFINE SERVER BOTH
INCOMING option
LAT
NONE
TELNET
PASSWORD
NOPASSWORD
DEFINE SERVER IPADDRESS ipaddress
DEFINE SERVER LOADHOST ipaddress
DEFINE SERVER LOGIN PASSWORD
DEFINE SERVER NAME "newname"
DEFINE SERVER NETWARE LOADHOST
"server"
DEFINE SERVER PRIVILEGED PASSWORD
DEFINE SERVER RARP {EN|DIS}
DEFINE SERVER SOFTWARE "filename"
Ethernet Network Interface Card Configuration Guide
Frequently-used Server Commands
Description
Enables or disables querying for a BOOTP
host at system boot time.
Enables or disables querying for a DHCP host
at system boot time.
Specifies the host to be used as a TCP/IP
gateway to forward packets between
networks. Enter an IP address.
Enables incoming LAT and Telnet
connections.
Enables only incoming LAT connections.
Disables incoming connections.
Enables only incoming Telnet connections.
Causes the server to prompt for a password
for all incoming connections.
Allows connections to be established without
prompting for a password.
Sets the Server's network IP address.
Specifies the TCP/IP host from which the
Server requests its run-time code.
Sets a new password that will be required
before incoming logins are accepted. You will
be prompted for the new password (up to 6
alphanumeric characters, case-insensitive).
Specifies a new name for the Server. Names
are restricted in length; generally a name of 11
or fewer characters is permissible.
Specifies the NetWare host from which the
Server requests its run-time code. Enter a file
server name of up to 11 characters.
Sets a new password that will be required for
privileged user status. You will be prompted
for the new password (up to 6 alphanumeric
characters, case-insensitive).
Enables or disables querying for a RARP host
at system boot time.
Specifies the name or path (TCP) of the
software download file. The filename can be
up to 11 characters, and the pathname can be
up to 26. The Server will add a ".SYS"
extension.
C-3