Oki B6100n Configuration Manual page 51

Command Option(s)
INITIALIZE option DELAY num
CANCEL
FACTORY
NOBOOT
RELOAD
LOGOUT option <nothing>
PORT num
PURGE SERVICE LOCAL
option
"service"
SET PRIVILEGED
{SHOW|MONITOR} QUEUE
{SHOW|MONITOR} SERVER
{SHOW|MONITOR} <nothing>
SERVICE option
"service"
ZERO COUNTERS ALL
option
PORT num
Ethernet Network Interface Card Configuration Guide
Frequently-used Server Commands
Description
Schedules a reboot after
value from 0 to 120.
Cancels an impending initialization.
Reboots the server to its factory default
settings.
Forces the Server to stop in Boot
Configuration Mode rather than fully
rebooting.
Forces the Server to download new
operational code and reprogram its
flash-ROM.
Logs out the current port (the port that issued
the command).
Logs out the specified port.
Removes the definitions of all local services.
Removes the definition of the specified
service.
Enters privileged mode, provided the user
enters the proper privileged password when
prompted.
Displays the status of Server queues once
(Show) or continually every three seconds
(Monitor).
Displays Server information once (Show) or
continually every three seconds (Monitor).
Displays characteristics about all configured
services once (Show) or continually every
three seconds (Monitor).
Displays only characteristics related to the
named service.
Zeroes all port, node, and Server counters.
Zeroes port counters for the specified port.
C-5
minutes. Enter a
num