Oki B6100n Configuration Manual page 52

C-6 Ethernet Network Interface Card Configuration Guide
Protocol Commands
PROTO
Command Option(s)
DEFINE PROTO {EN|DIS}
APPLETALK option
ZONE newzone
DEFINE PROTO IP {EN|DIS}
option
GATEWAY ipaddr
IPADDRESS ipaddr
LOADHOST ipaddr
NAMESERVER
ipaddr
DEFINE PROTO {EN|DIS}
LAT option
DEFINE PROTO {EN|DIS}
NETWARE option
DSCONTEXT string
DSLICENSE string
DSTREE string
DEFINE PROTO NATIVE
NETWARE
ENCAPSULATION
ETHER_II
option {EN|DIS}
802_2
SNAP
PROTOCOL
Protocol Commands
Description
Enables or Disables the AppleTalk protocol for
the Server.
Places the Server in a zone other than the
default.
Enables or Disables the TCP/IP protocol for the
Server.
Same as "DEFINE SERVER GATEWAY
ipaddress" on page
Same as "DEFINE SERVER IPADDRESS
ipaddress" on page
Same as "DEFINE SERVER LOADHOST
ipaddress" on page
Specifies the IP address of the host that will
resolve text host names into their numeric
equivalents for TCP/IP connection attempts.
Enables or Disables the LAT protocol for the
Server.
Enables or Disables the NetWare (IPX)
protocol for the Server.
Configures the NetWare Directory Services
context in which the Server is located. For more
information about NDS contexts, see your NDS
documentation.
Configures the NetWare Directory Services
license needed to enable NDS on your Server.
Enter the license string obtained from your
dealer or Lantronix.
Configures the NetWare Directory Services tree
in which the Server is located. For more
information about NDS trees, see your NDS
documentation.
Configures the Server to use the "native mode"
frame format.
Configures the Server to use Ethernet v2 frame
format.
Configures the Server to use 802.2 frame
format with NetWare SAPs.
Configures the Server to use 802.2 frame
format with SNAP SAPs.
C-3.
C-3.
C-3.