Saving The Registration Memory As A Bank File - Yamaha Tyros4 Owner's Manual

4
Press one of the REGISTRATION MEMORY [1]–[8] buttons to
which you wish to memorize the panel setup.
The memorized button becomes red, which indicates the number button contains
data and its number is selected.
About the lamp status
• Red: Data registered and currently selected
• Blue: Data registered but not currently selected
• Off: No data registered
5
Register various panel setups to other buttons by repeating
steps 1–4.
The registered panel setups can be recalled by simply pressing the desired number
button.

Saving the Registration Memory as a Bank file

You can save all the eight registered panel setups as a single Registration Memory Bank file.
1
Press the REGIST BANK [+] and [-] buttons simultaneously to
call up the Registration Bank Selection Display.
2
Press the [6 ] (SAVE) button to save the Bank file (page 57).
Bank 04
Bank 03
Bank 02
Bank 01
NOTICE
If you select the button whose
lamp is lit in red or blue here, the
panel setup previously memo-
rized to the button will be erased
and replaced by the new settings.
NOTE
The panel setups registered in the num-
bered buttons are preserved even when
you turn off the power. If you want to
delete all the eight current panel setups,
turn the power switch on while holding
the B5 key (right-most B key on the key-
board) or refer to page 32.
2
Tyros4 Owner's Manual
6
73