Connecting To The Internet - Yamaha Tyros4 Owner's Manual

Formatting a USB Storage Device or Internal Hard Disk Drive
To format a USB storage device or internal hard disk drive, execute the format operation.
If you want to format a USB storage device, make sure that a USB storage device is con-
nected to the [USB TO DEVICE] terminal beforehand.
1
Call up the operation display.
[FUNCTION]  [I] UTILITY  TAB [][] MEDIA
2
2
Press the [A]/[B] buttons to select the USB storage device or
internal HDD to be formatted from the device list.
The indications USB 1, USB 2, etc. will be displayed depending on the number of
the connected USB storage devices.
3
Press the [H] (FORMAT) button to format the device/HDD.

Connecting to the Internet

By using the [LAN] or [USB TO DEVICE] terminal, you can connect the instrument to the Internet. For instructions on
connecting, refer to page 91 and Internet Connection Guide downloadable from the Yamaha website.
NOTICE
The format operation deletes any
previously existing data. Make
sure that the media you are for-
1
matting does not contain impor-
tant data. Proceed with caution,
especially when connecting mul-
tiple USB storage medias.
3
NOTE
When the internal HDD is formatted, the
Tyros4 will be restarted automatically.
Tyros4 Owner's Manual
11
101