Connecting To A Computer - Yamaha Tyros4 Owner's Manual

Digital workstation
Hide thumbs Also See for Tyros4:
Table of Contents

Advertisement

Connecting to a Computer

By connecting a computer to the [USB TO HOST] terminal, you can transfer data between
the Tyros4 and the computer via MIDI, and use the computer to control, edit and organize
data on the Tyros4. For example, you can use the included Voice Editor program to edit
the Tyros4's Custom Voices.
Precautions when using the [USB TO HOST] terminal
When connecting the computer to the [USB TO HOST] terminal, make sure to observe the following points. Failing to
do so risks freezing the computer and corrupting or losing the data. If the computer or the instrument freezes, restart the
application software or the computer OS, or turn the power to the instrument off then on again.
NOTICE
• Use an AB type USB cable of less than about 3 meters.
• Before connecting the computer to the [USB TO HOST] terminal,
exit from any power-saving mode of the computer (such as sus-
pended, sleep, standby).
• Before turning on the power to the instrument, connect the com-
puter to the [USB TO HOST] terminal.
102
Tyros4 Owner's Manual
B type
A type
USB cable
NOTICE
• Execute the following before turning the power to the instru-
ment on/off or plugging/unplugging the USB cable to/from the
[USB TO HOST] terminal.
• Quit any open application software on the computer.
• Make sure that data is not being transmitted from the instru-
ment. (Data is transmitted only by playing notes on the key-
board or playing back a song.)
• While the computer is connected to the instrument, you should
wait for six seconds or more between these operations: (1)
when turning the power of the instrument off then on again, or
(2) when alternately connecting/disconnecting the USB cable.
NOTE
You need to install a USB-MIDI driver to
connect the computer and the instru-
ment. Refer to the separate Installation
Guide.
NOTE
You can also use the MIDI IN/OUT ter-
minals to connect to a computer. In this
case, a USB-MIDI interface (such as the
Yamaha UX16) is needed. For more
information, refer to the owner's manual
of the USB-MIDI interface.
NOTICE
Recognition of the computer and
Tyros4 connection takes a certain
amount of time.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents