Playing Different Voices With The Left And Right Hands - Yamaha Tyros4 Owner's Manual

Playing Different Voices with the Left and Right Hands

1
Make sure that some of PART ON/OFF [RIGHT 1]–[RIGHT 3]
buttons are turned on.
2
Press the PART ON/OFF [LEFT] button to turn it on.
3
Press one of the VOICE category selection buttons to call up
the Voice Selection display for the Left part.
4
Press one of the [A]–[J] buttons to select the desired Voice.
5
Play the keyboard.
The notes you play with your left hand sound one Voice (LEFT Voice selected
above), while the notes you play with your right sound a different Voices (RIGHT
1–3 Voices).
Voice LEFT
(LOWER)
Keyboard Parts
Voices can be assigned independently to each of the four keyboard parts: Right 1, Right 2, Right 3 and Left.
You can combine these parts by using the PART ON/OFF buttons to create a rich, ensemble sound.
Lower section of the keyboard
When the LEFT part is off, the RIGHT 1–3 Voices can be played over the entire keyboard. When the LEFT
part is on, keys lower than F#2 (the Split Point) are set for playing the LEFT part and those higher than the
Split Point are set for playing the RIGHT 1–3 parts.
NOTE
To change the Split Point, press: [FUNCTION]  [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING  TAB [][] SPLIT
POINT. For more information, refer to the Reference Manual on the website.
Split Point
Voice RIGHT 1, 2, 3
(UPPER)
Upper section of the keyboard
Split Point (F#2)
You can save the settings to Registra-
tion Memory. See page 72.
You can confirm the currently selected part by checking which
lamp of the PART SELECT buttons is lit. To select the desired
keyboard part, press the corresponding part button.
If you want to turn a specified part on, press the
desired PART ON/OFF button.
Tyros4 Owner's Manual
NOTE
35
1