Operating Style Playback - Yamaha Tyros4 Owner's Manual

Digital workstation
Hide thumbs Also See for Tyros4:
Table of Contents

Advertisement

Operating Style Playback

To Start/Stop Playing
 [START/STOP] button
Style starts playing back as soon as the [START/STOP] button is pressed. To stop play-
back, press the button again.
 [SYNC START] button
This puts the Style playback in "standby." The Style starts playing back when you press
any note on the keyboard (when [ACMP] is off) or you play a chord with your left hand
(when [ACMP] is on). When you start the Style playback with the [SYNC START] button,
pressing this button again stops playback and puts the playback in "standby" again.
 [SYNC STOP] button
You can start and stop the Style anytime you want by simply playing or releasing the keys
in the chord section of the keyboard. Make sure that the [ACMP] button is on, press the
[SYNC STOP] button, then play the keyboard.
 INTRO [I]–[III] buttons
The Tyros4 features three different Intro sections to add an introduction before starting the
Style playback. After pressing one of the INTRO [I]–[III] buttons, start playback by using
the [START/STOP] button or [SYNC START] button. When the Intro finishes playing, the
Style playback automatically shifts to the Main section.
 ENDING/rit. [I]–[III] buttons
The Tyros4 features three different Ending sections to add an ending before stopping Style
playback. When you press one of the Ending [I]–[III] buttons while Style is playing back,
the Style will automatically stop after the ending is played. You can have the ending gradu-
ally slow down (ritardando) by pressing the same ENDING button once again, while the
ending is playing.
About the lamp status of the section buttons (INTRO/MAIN VARIATION/
BREAK/ENDING)
• Red: The section is currently selected.
• Red (flashing): The section will be played next, following the currently selected sec-
tion.
• Blue: The section contains data but not currently selected.
• Off: The section contains no data and cannot be played.
48
Tyros4 Owner's Manual
NOTE
When the fingering mode is set to "Full
Keyboard" or "AI Full Keyboard," Syn-
chro Stop cannot be turned on.
To change the fingering mode:
[FUNCTION]  [C] STYLE SETTING/
SPLIT POINT/CHORD FINGERING 
TAB [][] CHORD FINGERING
NOTE
If you press the ENDING/rit. [I] button
when the Style is playing, a fill-in auto-
matically plays before the ENDING/rit
[I].

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents