Playback Of Songs - Yamaha Tyros4 Owner's Manual

Playback of Songs

You can play back the following types of Songs.
• Preset Songs (in the PRESET Page of the Song Selection display)
• Your own recorded Songs (saved to the USER/HD/USB Page)
• Commercially available Song data: SMF (Standard MIDI File) or ESEQ
1
Press any of the SONG [I]–[IV] buttons to call up the Song
Selection display.
2
Press the TAB [][] buttons to select the location of the
desired Song.
If you want to playback of Song in the USB storage device, connect the USB stor-
age device containing MIDI Song data to the USB TO DEVICE terminal before-
hand.
3
Select the desired Song by using the [A]–[J] buttons.
You can also select a Song by using the [DATA ENTRY] dial, then press the
[ENTER] button to execute.
4
Press the SONG [PLAY/PAUSE] button to start playback.
Queuing the next Song for playback
While a Song is playing back, you can queue up the next Song for playback.
This is convenient for chaining it to the next Song smoothly during stage per-
formance. Select the Song you want play next in the Song Selection display,
while a Song is playing back. The "NEXT" indication appears at the upper
right of the corresponding Song name. To cancel this setting, press the [8 ]
(NEXT CANCEL) button.
5
Press the SONG [STOP] button to stop playback.
58
Tyros4 Owner's Manual
NOTE
For information on compatible data for-
mats, refer to page 9.
2
NOTE
The Song Selection display lets you
memorize the path of specific Song to
one of the panel buttons. For informa-
tion on memorizing Song path, refer to
page 27.
NOTE
You can instantly jump back to the Main
display by "double-clicking" on one of
the [A]–[J] buttons.