When Pictbridge Printing Does Not Work - Ricoh Aficio MP C3500 Operating Instructions Manual

When PictBridge Printing Does Not Work

This section explains likely causes and possible solutions for problems that can
occur when PictBridge printing.
Problem
PictBridge is not avail-
able.
When two or more digital
cameras are connected,
the second and subse-
quent cameras are not
recognized.
Printing is disabled.
Printing is disabled.
Cause
There is a problem with
the USB connection or the
PictBridge settings.
You have connected mul-
tiple digital cameras.
The number of originals
exceeds the maximum
number of pages that can
be printed at a time.
There is no paper of the
specified size remaining.
When PictBridge Printing Does Not Work
Solution
Use the following procedure to check
the connection and settings:
A
Disconnect and then reconnect the
USB cable.
B
Check the PictBridge settings are
enabled.
C
Disconnect the USB cable, and then
turn off the machine. Turn the ma-
chine back on. When the machine
has fully booted up, reconnect the
USB cable.
Connect one digital camera only. Do
not connect multiple cameras.
The maximum specifiable print quanti-
ty at a time is 999. Respecify the quanti-
ty to 999 or less, and then retry printing.
There is no paper of the specified size
remaining.
If you have to use paper that is not of
the specified size, perform Form Feed.
To cancel printing, perform Job Cancel.
4
63