Enterasys 2H252-25R Installation & User Manual page 41

Table 4-1 describes the LED indications and provides recommended actions as appropriate.
Refer to the HSIM or VHSIM user's guide for a description of the HSIM or VHSIM LED
indications.
NOTE: The terms flashing, blinking, and solid used in
following:
Flashing indicates an LED is flashing randomly.
Blinking indicates an LED is flashing at a steady rate (approximately 50% on, 50% off).
Solid indicates a steady LED light. No pulsing.
Table 4-1 LANVIEW LEDs
LED Color
PWR Off
Green
Amber
State
Device electronics not
receiving power from power
supply(ies).
Functional. Power
supply(ies) operating
normally.
Indicates loss of power
supply redundancy.
Table 4-1 indicate the
Recommended Action
1. Ensure that the power cords are
plugged in correctly and that
there is power at the power
source.
2. Contact Enterasys Networks for
assistance.
None.
1. Ensure that the power cords are
plugged in correctly and that
there is power at the power
source.
2. Contact Enterasys Networks for
assistance.
Troubleshooting
Using LANVIEW
4-3