Table of Contents
Advertisement
MultiModemZPX User Guide
Step 3: Install the Modem Driver
If you use Windows 95 or newer, you must install the modem driver. The modem
driver tells Windows how to control the modem. If you use a Linux operating sys-
tem, please see Appendix F for installation instructions. If you use the SCO OpenS-
erver operating system, please see Appendix G.
Windows 95
1. After installing the MultiModemZPX into your computer, turn the computer on
2. Insert the MultiModemZPX CD into your computer's CD-ROM drive, and then
3. When Windows says it has found an updated driver for the Multi-Tech
4. When Windows says it has found the driver for the Voice Modem, click Next.
5. When prompted, click Finish to complete the installation.
6. After completing the hardware and driver installation, you must configure your
7. After setting up your modem for country-specific operation, you'll want to con-
Windows 98/Me
1. After installing the MultiModemZPX into your computer, turn the computer on
2. Click Next to begin the installation.
3. When the wizard asks, "What do you want Windows to do?" Select Search for
4. When the wizard says, "Windows will search for new drivers in its driver data-
5. When prompted, select the driver for the Multi-Tech MT5634ZPX-PCI-V92, and
6. If the Insert Disk dialog box says that the file 56ZPX.CAT cannot be found, click
7. When prompted, click Finish to complete the modem driver installation.
and allow Windows 95 to start. As the computer starts, it automatically detects
the new modem, and the New Hardware Found wizard appears.
click Next. Windows begins searching for the driver.
MT5634ZPX-PCI-V92, click Finish to complete the modem driver installation.
modem for country-specific operation. See "Step 4: Configure the Modem for
Your Country" for configuration instructions.
figure your communications software or Windows Dial-Up Networking. Infor-
mation about configuring your communications software can be found in Step 5.
and allow Windows to start. As the computer starts, it automatically detects the
new modem, and the New Hardware Found wizard appears.
the best driver for your device, and then click Next.
base on your hard drive and in any of the following selected locations," insert
the MultiModemZPX CD into your computer's CD-ROM drive, and then select
CD-ROM drive. Click Next.
then click Next.
Skip File to continue the installation.
2 Installation
8
Advertisement
Table of Contents
