PLC-WTC500L Expand Serial Command Functional Specifications
8.10.21 CF_HDMI SETUP Command
Command
"CF_HDMISETUP_%1"[CR]
"NORMAL"----------------------Select Normal
%1
"ENHANCED" -----------------Select Enhanced
Set status of HDMI setup - Image.
(Valid only when in the normal Power ON status)
Details
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
8.10.22 CF_HDMI SOUND Command
Command
"CF_HDMISETUP_%1"[CR]
"HDMI"----------------------Set PCM Input(Digital sound)
%1
"EXTARNAL" -------------Set external sound input
Set status of HDMI setup – Sound.
(Valid only when in the normal Power ON status)
Details
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
8.10.23 CF_PJPINCODE Command
Command
"CF_PJPINCODE_%1" [CR]
%1
"0000 – 9999" ------------- Directly specify PJ PIN code
Enter PIN code to cancel PIN code lock
(Available only in the normal Power ON status)
PIN code can not be changed. (Only PIN code lock is canceled.)
*When PIN code Lock is enabled:
PIN code is matched ------------------------- Command is valid (Acceptable)
PIN code is mismatched -------------------- Command is invalid (Error code "102")
PIN code is beyond %1 available range ----Command is invalid (Error code "?")
Details
When PIN code lock is canceled:
PIN code is within %1 range ----------- Command is valid (Acceptable)
PIN code is out of %1 range ----------- Command is invalid (Error code is 102)
This command is only valid when "PJ PIN code" dialog is displayed to enter PIN
code after Power is ON and Countdown is completed.
When PIN code lock is set to "On1", it needs to send this command every time the
projector is turned on.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
41/75