Cr_Autosetupkeystone Command; Cr_Backgnd Command; Cr_Disp Command; Cr_Logo Command - Sanyo PLC-XK2200 - 2200 Lumens Manual

PLC-XK2200 /2600 /XK3010

9.11.4 CR_AUTOSETUPKEYSTONE Command

Command "CR_AUTOSETUPKEYSTONE" [CR]
Details Get Keystone setting status in Auto setup
Acceptable
Response
%a
Unacceptable

9.11.5 CR_BACKGND Command

Command "CR_BACKGND" [CR]
Details Get setting status of Screen for no signal
Acceptable
Response
Unacceptable

9.11.6 CR_DISP Command

Command "CR_DISP"[CR]
Details Get setting status of Display
Acceptable
Response
%a
Unacceptable

9.11.7 CR_LOGO Command

Command "CR_LOGO"[CR]
Details Get setting status of Logo
Acceptable
Response
%1
Unacceptable

9.11.8 CR_TERMINAL Command

Command "CR_TERMINAL" [CR]
Details Get setting status of Terminal
Acceptable
Response
%a
Unacceptable

9.11.9 CR_P-MANE Command

Command "CR_P-MANE"[CR]
Expand Serial Command Functional Specifications
"000_%a"[CR]
"AUTO" -------------- Auto Keystone is Auto
"MANUAL" ---------- Auto Keystone is Manual
"OFF" ---------------- Auto Keystone is OFF
"Error Code"[CR]
"000_%1" [CR]
"BLUE" -------------------------------- Blue Back is selected
%1 "USER" ------------------------------- User is selected
"BLACK" ------------------------------ Black Back is selected
"Error Code" [CR]
"000_%a"[CR]
"ON" -------------------------- Display is ON
"OFF" ------------------------ Display is OFF
"CNTDWNOFF" ---------- Countdown OFF
"Error Code" [CR]
"000_%1"[CR]
"OFF" ------------------------------ Logo function is OFF
"DFLT" ----------------------------- Default Logo is selected
"USER" ---------------------------- User Logo is selected
"Error Code" [CR]
"000_%a"[CR]
"COMPUTER"-------------Computer Input mode
"MONITOR"----------------Monitor Out mode
"Error Code" [CR]
65 / 73