Signal" Menu - Epson EMP-732 User Manual

Using the Configuration Menu Functions

"Signal" Menu

• The "Trackingg", "Sync.g", "Position" and "Resize"
settings can not be adjusted if no signals are being input.
• The items displayed in the "Signal" menu change
depending on the input signal that is being projected.
Menu commands that do not apply to the current input
signal cannot be adjusted.
• If using the EMP-745/737, you cannot change any of the
"Signal" configuration menu settings while EasyMP is
running.
Computer/RGB video
Sub-menu
Auto Setup Selects whether the automatic adjustment function for
automatically optimising images when the input source is
changed is turned "ON" or "OFF".
Trackingg Adjusts computer images when vertical stripes appear in the
images.
Sync.g Adjusts computer images when flickering, fuzziness or
interference appear in the images.
•Flickering and fuzziness may also appear when the
brightness, contrastg, sharpness or keystone settings are
adjusted.
•You can obtain the best results if you adjust the
first and then adjust the sync.
Position Moves the image display position vertically and horizontally.
•Press the [Enter] button on the remote control or on the
projector's control panel and then make the adjustment
using the display position adjustment screen that appears.
Computer Selects the input signal in accordance with the equipment
Input that is connected to the [Computer/Component Video] port.
If set to "Auto" the input signal is set automatically in
accordance with the connected equipment.
If you select "Auto", and the colours appear unnatural, select
"Computer".
Reset Return the all settings in the "Signal" menu to their default
except the "Computer Input" setting.
•Press the [Enter] button on the remote control or on the
projector's control panel.
•To return all settings such as the "Image" and "Signal"
menu settings to their default values, select "Reset All"
from the "Reset" menu.
Function
trackingg
sp.68
User's Guide
60
Default
ON
Depends on
connection
Depends on
connection
Depends on
connection
Auto
-