Connecting to a Video Source
Projecting S-Video Images
Use a commercially-available
To S-Video output port
S-Video cable
(commercially-available)
TIP
If more than one input source is connected to the projector at the
same time, you can use button operations to select the signals to be
projected. s
p.37
S-Videog
cable to make the connections.
To [S-Video] port
Projecting Component Video Images
Use the optional
component videog
"Appendices: Optional Accessories and Consumables"
Use to connect the
projector to a commercially
available component video
cable (RCA × 3, male).
To component
video output port
Component video cable
(optional)
TIP
•The input source is determined automatically based on the input
signals.
Some video signals may be reproduced with different colours from
the original images. In such case, set the input source to
"Component Video". s
p.61
•If more than one input source is connected to the projector at the
same time, you can use button operations to select the signals to be
projected. s
p.37
User's Guide
cable to make the connection.
sp.108
To [Computer/Component Video]
port (blue)
25