Usb Connection Setup - Epson EMP-732 User Manual

List of ESC/VP21 Commands

USB Connection Setup

In order to control the projector using ESC/VP21 commands via a USB
connection, the following preparations must be carried out.
PROCEDURE
Download the USB driver (USB-COM Driver) from the
1
EPSON website to your computer.
The URL is as follows.
http://www.epson.co.uk/support/download/index.htm.
Install the downloaded USB driver on your computer.
2
Read the instructions displayed on the download screen.
Change the "Link 21L" setting in the "Extended"
3
menu to "ON".
Turn the projector's power off.
4
Wait until the cool-downg
5
"pip-pip" confirmation buzzer sounds, and then turn
on the power.
Once the projector's power has turned back on, communication
via a USB Connection will then be possible.
period has ended and a
CAUTION
The setting you made will be disabled if you disconnect the power
cable before the cool-down period has ended and a "pip-pip"
confirmation buzzer sounds.
User's Guide
114