Input Signal Settings - Signal Menu - Epson V11H879541 User Manual

Input Signal Settings - Signal Menu

Normally the projector detects and optimizes the input signal settings automatically. If you need to
customize the settings, you can use the Signal menu. The available settings depend on the currently
selected input source.
Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the
Auto button on the remote control.
To change settings for an input source, make sure the source is connected and select that source.
Setting
Resolution
Aspect
Tracking
Sync.
Position
Options
Auto
Wide
Normal
See the list of available
aspect ratios
Varying levels available
Varying levels available
Up, down, left, right
137
Description
Sets the input signal resolution if not
detected automatically using the Auto
option
Sets the aspect ratio (width-to-height
ratio) for the selected input source
Adjusts signal to eliminate vertical stripes
in computer images
Adjusts signal to eliminate fuzziness or
flickering in computer images
Adjusts the image location on the screen