Table of Contents
Advertisement
Input Signal Settings - Signal Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to
customize the settings, you can use the Signal menu. The available settings depend on the currently
selected input source.
Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the
Auto button on the remote control.
Note: Available settings depend on the current input source.
To change settings for an input source, make sure the source is connected and select that source.
Setting
Aspect
Overscan
Options
See the list of available aspect
ratios
Auto
Off
4%
8%
189
Description
Sets the aspect ratio (width-to-
height ratio) for the selected input
source
Changes the projected image
ratio to make the edges visible by
a selectable percentage or
automatically.
Auto is available only when the
input signal is HDMI.
Advertisement
Table of Contents
