Adjusting The Image Angle And Automatic Keystone Correction Function - Epson EMP-732 User Manual

Adjusting the Screen Image
Adjusting the Image Angle and Automatic Keystone
Correction Function
The projector should be set up so that it is as perpendicular to the screen as
possible.
Seen from the side
6
Centre of
lens
1
Seen from above
5
5
If you can not set up the projetor so that it is at right angle to the screen
surface, you can tilt the projector up. By extending or retracting the front
adjustable foot, you can adjust the projection angle upward to a maximum
12°.
CAUTION
Do not tilt the projector at more than the maximum angle. Doing so
may cause the projector to fall down or fall off a desk and may result
in injury.
User's Guide
41