Epson EMP-732 User Manual page 84

Problems Solving
Interference or distortion appear in images
Check
Are the image signal format settings correct? If a
Only when projecting images
from a video source
Are the cables connected correctly?
Is an extension cable being used?
Has the correct resolution been selected?
Only when projecting computer images
Have the "Sync.g" and "Trackingg" settings
been adjusted correctly?
Computer and RGB video signals only
composite videog or S-Videog
menu command to select the signal format.
sp.61
"Signal" - "Video Signal"
Check that all of the cables required for projection are securely connected. sp.20–
If an extension cable is used, electrical interference may affect the signals. Use the accessory cables
and check if this helps.
Set the computer so that the signals that are output are compatible with this projector.
"List of Supported Monitor Displays"
s Computer documentation
Press the [Auto] button on the remote control or the [Enter] button on the projector's control panel to
carry out automatic adjustment. If the images have not been adjusted correctly after using automatic
adjustment, you can make the adjustments using the "Sync." and "Tracking" menus. sp.45,
Remedy
source is connected to the projector, use the "Video Signal"
sp.115
User's Guide
83
p.26
p.46