Connecting To A Video Source; Projecting Composite Video Images - Epson EMP-800 User Manual

Connecting to a Video Source

Caution :
When connecting the projector to other video sources, take the following precautions.
• Turn off the power for both the projector and the video source before connecting them.
If the power for either device is on at the time of connection, damage may result.
• Check the shapes of the cable connectors and the device ports before making the
connections. If you try to force a connector to fit a device port with a different shape or
number of terminals, a malfunction or damage to the connector or port may result.

Projecting Composite Video Images

• Use the accessory A/V cable (red/white/yellow) to connect the video source
to the Video and Audio 2 ports at the rear of the projector.
• If the audio output port of the video source is a stereo mini jack, use a
commercially-available audio cable to connect the video source to the Audio
1 port at the rear of the projector.
When connecting using the A/V cable
To video output port (yellow)
To audio output L port (white)
To audio output R port (red)
When the video equipment's audio output port is a stereo mini jack
To video output
port (yellow)
To audio output
port
Tip :
After making the connections, change the Audio Input setting in the Audio menu to
either Audio1, Audio2 or USB, depending on which input port you are using. The
default setting is Audio2.
To Video port (yellow)
A/V cable
(accessory)
A/V cable (yellow)
(accessory)
Audio cable (commercially-available)
To Video port
(yellow)
To Audio 1 port
To Audio 2 port
(white/red)
29