Device Restart (Reboot); Information Display (Info); File System Size (Storagememorysize) - Micro Innovations Windows CE Manual

Windows CE
7.15 D
EVICE RESTART
The auxiliary program reboot.exe executes a device restart. When no command line parameter is
entered, a confirmation prompt will appear that has to be acknowledged by the user before the device
is restarted. If the call is executed as follows «reboot.exe –quiet», no confirmation prompt will
appear.
7.16 I
NFORMATION DISPLAY
The auxiliary program info.exe displays the information of the system.
The following command line parameters are supported:
Parameter Description
-fullscreen The program uses the full screen, i.e. the taskbar is not visible.
-first Displays additional information for new users.
-export «file» The information is written to the specified file. The file is only overwritten if the
content is changed. Otherwise it is not overwritten.
-h or -? Displays information on the available command line parameters.
7.17 F S S
ILE YSTEM
The auxiliary program StorageMemorySize.exe can be used to change the size for the file system.
For the file system, the system takes by default 1/8 of the entire memory less the memory requirement
of the operating system. In specific cases it can be of use to change this setting.
The following command line parameters are supported:
Parameter Description
-size Size of the file system in MBytes (for the program memory at least 1 MByte is
additionally reserved for the program memory currently used)
Actual file system size in KBytes
-h or -? Displays information on the available command line parameters.
M000174-19
(R )
EBOOT
(I )
NFO
(S M
IZE TORAGE EMORY
S )
IZE
Programs
73