Password Settings; Command Line Parameters - Micro Innovations Windows CE Manual

Programs
7.5.1 P
ASSWORD SETTINGS
The password settings are stored in the «FtpSvr.ini» file in the directory «\"Bootdevice"\OS\». The
data stored is naturally encrypted. The file is stored on the boot device, which means that the
password settings are also retained after a restart.
7.5.2 C
OMMAND LINE PARAMETERS
The following parameters are supported:
Parameter
-d
-p «Password»
-i «File»
-h
-exit
-port «number»
-prio low
-prio high
-root «directory»
-timeout «sec.»
52
Description
Deactivates a previously activated password protection.
Activates the password protection with the new password transferred as a
parameter.
Defines the path to the INI file in which the password settings are saved. If
the password protection is activated without the /i parameter, an INI file
«FtpSvr.ini» is created in the directory «\StorageCard\OS». The INI file
only contains encrypted data.
Minimizes the server dialog immediately to the status bar when the server
is started (dialog not visible).
Exits the FTP server. This call only has a function if the server is already
running.
Defines the port number of the FTP server, the default port number is 21.
Only values between 0 and 65535 are allowed.
The setting «high» sets the priority of the FTP server to 1 higher than
normal, «low» sets the priority to 1 below normal. This setting is optional.
Defines the root directory. Changing to upper directories is not allowed.
Defines the timeout in seconds (default is 5, maximum is 120). This is
helpful for slow connections via modem.
Windows CE
M000174-19