Command Line Parameters; Xv400; Xv100; Expanding The Control Panel - Micro Innovations Windows CE Manual

Windows CE
4.1 C L
OMMAND INE
4.1.1

XV400

The command line call of the programs with the suffix .CPL is as follows:
Parameter
-fullscreen
-cpl «CPL program»
Other parameters
Examples:
Set number of colors to 16 bits
Rotate screen orientation 90°
Set backlight to 60%
Note:
The supported command line parameters should be taken from the corresponding CPL program (e.g.
Display). The "control panel" entry must always be placed in inverted commas!
4.1.2

XV100

The individual programs of the Control Panel can be called directly with the relevant command line
parameters.
Examples:
Set number of colors to 16 bits
Rotate screen orientation 90°
Set backlight to 60%
Note:
The supported command line parameters should be taken from the corresponding CPL program (e.g.
Display.exe).
4.2 E
XPANDING THE
Windows CE 5.0 allows you to add further programs to the Control Panel. This requires an entry to be
made in the registry which defines the path on which the additional programs are stored.
Example:
[HKEY_LOCAL_MACHINE\SOFTWARE\Micro Innovation\UserCpl]
"userCplDir"="\\StorageCard\\cpl"
After this entry is added to the registry, all *.exe files in the directory \StorageCard\cpl are also
displayed in the Control Panel.
M000174-19
P
ARAMETERS
Description
The program uses the full screen, i.e. the taskbar is not
visible. This function is only active if the parameter –cpl
is not used.
Selection of the .CPL program
The other parameters depend on the CPL program
selected.
Call:
"control panel" –cpl display.cpl –colors 16
"control panel" –cpl display.cpl –rotate 90
"control panel" –cpl display.cpl –back 60
Call:
display.exe -colors 16
display.exe -rotate 90
display.exe -back 60
C P
ONTROL ANEL
System settings
21