Sample Settings; Start/Stop/Refresh Of The Sntp Client - Micro Innovations Windows CE Manual

Windows CE
7.10.2 S S
AMPLE ETTINGS
The settings for the SNTP client can be set as follows in a
[HKEY_LOCAL_MACHINE\Services\TIMESVC]
"server"=multi_sz:"swisstime.ethz.ch","thrad.cybernet.ch"
"AutoUpdate"=dword:1
"ServerRole"=dword:0
"refresh"=dword:927C0
"recoveryrefresh"=dword:57E40
"threshold"=dword:5265C00
Notes on the above example:
•
The entries with «dword» are in hexadecimal format.
•
"refresh"=dword:927C0
•
"recoveryrefresh"=dword:57E40 corresponds to 6 minutes in milliseconds (6*60*1000)
•
"threshold"=dword:5265C00
The settings for the SNTP client can be stored in a REG file SNTP.REG and started in the
Autoexec.bat file as follows:
REM Verify boot device, if parameter is not
REM available, the boot device is StorageCard
SET bootdev=StorageCard
IF "%1" == "" GOTO START
SET bootdev=%1
IF exist \%bootdev%\sntp.reg CALL regedit.exe "\%bootdev%\sntp.reg" "/Q"
services.exe refresh NTP0:
7.10.3 S /S /R
TART TOP EFRESH OF THE
The SNTP client is started by default. The values for a time synchronization are not set in the default
setting.
The SNTP client is prepared by setting the appropriate registry entries. The services.exe program
transfers the new registry entries to the SNTP client. The possible command line calls are listed in the
table below:
Functionality
Restart of the SNTP client with actual registry
entries
Start
Stop
Status: Display of the current status
M000174-19
REG file
corresponds to 10 minutes in milliseconds (10*60*1000)
corresponds to 1 day in milliseconds (24*60*601000)
SNTP C
LIENT
Call
Services.exe refresh NTP0:
Services.exe start NTP0:
Services.exe stop NTP0:
Services.exe list
Programs
(see also chapter Autoexec.reg):
67