System Menu; Command Line Parameters - Micro Innovations Windows CE Manual

Programs
7.4.2 S
YSTEM MENU
The System menu contains the following entries, although not all entries are available in Windows CE:
Menu item
Request screen refresh
Touch lock
Touch unlock
Touch disable
Touch enable
Send Ctrl-Alt-Del
Send Ctrl-Esc
Send Alt-Tab
** Ctrl Down
Ctrl Up
Alt Down
Alt Up
** These functions are not available, if the command line parameter –nospecialkey is used. The
menu items vary according to the version of the remote server.
Note:
The System menu on the remote client for Windows CE is called using the ? button in the title bar.
7.4.3 C
OMMAND LINE PARAMETERS
Start the remote client on the Panel/PC. The command line call supports the following parameters:
Parameter Description
server:Port See also
-rotate
See chapter
-fullscreen
-viewonly
-scale x/y
-raw Communication with the
-hextile Communication with the
-pcx (default) Communication with the
(recommended).
-nospecialkey Removes the menu items «Send Ctrl-Alt-Del», «Send Ctrl-Esc» and «Send
Alt-Tab» from the
50
Description:
This function refreshes the view in the remote client.
These functions enable the touch to be locked/unlocked or
enabled/disabled. Further information on this is provided in the
chapter Touch Enable/Disable.
These functions execute the corresponding button combination on
the device. «Ctrl-Alt-Del» and «Alt-Tab» launch the Task Manager,
«Ctrl-Esc» activates the START button on the Windows start bar.
These functions are used to enable key combinations using ALT and
CTRL to be run on the device. For example, if «Ctrl Down» is
executed, the CTRL button stays «actuated» until «Ctrl Up» is
executed. These functions are only used with older versions of the
remote server.
Remote server
Options
remote server
Remote server
Remote server
System menu.
without compression.
executed with HEXTILE compression.
executed with PCX compression
Windows CE
M000174-19