Owner (Owner); Net Setup (Netsetup) - Micro Innovations Windows CE Manual

System settings
4.8 O (O
WNER WNER
This program is used for specifying the user, password and domain for logging into an external
®
Windows server/PC. The default setting is the user name MI_PANEL and no password.
Specific operations must be carried out in order for the selected settings to be retained after a restart.
If the entries are acknowledged with OK, the current settings can be saved inside the registry file
\NETWORK.REG. The content of the REG file must be inserted in the
settings are reset after a restart.
See also chapter Autoexec.reg,
Note:
These entries are only required if the device is to be connected to a Windows
®
Windows operating system. This requires the appropriate user rights, directory or printer
authorizations on the server/PC.
4.9 N (N
ET SETUP ETSETUP
The network name can be set using the Netsetup.exe program. The command line call is as follows:
Parameter Description
-n [Name] Network name
-default Sets the default network name consisting of 'MI_' and the last 6 digits of the
MAC address
-r Device is restarted immediately if the settings are modified.
Display of the possible parameters
-? or –h
The currently set network name is displayed during the startup (see
System properties on the
32
)
File .REG and Ethernet
)
Device tab.
Windows CE
Autoexec.reg file so that the
®
Server/PC with the
Startup behavior) and inside the
M000174-19