Name Resolution In Windows Networks; Network Access Procedure - Micro Innovations Windows CE Manual

For all micro panel devices
Table of Contents

Advertisement

Ethernet
2.1.1
N
AME RESOLUTION IN
The name resolution is absolutely necessary in order to access enabled resources (drives, directories,
printers) of a computer with the Windows operating system. Access via IP addresses is not supported
by Windows CE.
The name resolution under Windows CE is executed via the NetBios name (UDP, Port 137) service.
The following must be observed on the computer:
The options «File and Printer Sharing» and «Internet Protocol (TCP/IP)» in the network
settings must be activated.
If a domain controller is not used: The option «Enable NetBIOS over TCP/IP» must be
selected. This setting is carried out in the Network Settings «Internet Protocol TCP/IP –
Properties – Advanced – WINS»: Network Settings – Internet Protocol TCP/IP – Properties –
Advanced – WINS: Option «Enable NetBIOS over TCP/IP»)
The following settings must be set in the local security policy. These settings are located at
Control Panel – Administrative Tools – Local Security Policy – Local Policies – Security
Options:
Option:
Accounts: Local account use of blank passwords.
From Windows XP blank passwords are not permissible.
Network security: LAN Manager authentication level
The relevant rules for user name and password must be observed. When using a domain
controller, consult your network administrator. On desktop PCs, these rules are found under
Control Panel – Administrative Tools – Local Security Policy – Account Policies –
Password Policy.
In a network without a domain controller, the service «Computer Browser» must be started to
support correct name resolution. See
Management – Services and Applications – Services. The «Computer browser» setting must
be activated.
When using several network cards, the used network card must be installed at the first
position in the order of all network cards. Network cards of virtual PCs such as VMWare or
VirtualPC must be deactivated under certain circumstances.
2.1.2
N
ETWORK ACCESS PROCEDURE
Does
Ping
function from the Windows computer to the MICRO PANEL? See also the chapter
Network test
Does
Ping
function from the MICRO PANEL to the Windows computer?
Set up a user name and password on the computer. Disable the option «Change ID on the
next start».
Enable the required resources on the computer (drives/directories/printers).
Set the user name and the password via
Open a command line window on the MICRO PANEL: Test the network access with the net
view command. For example, «net view \\hostname» will display the enabled resources of the
computer with the network name «hostname».
16
W
INDOWS NETWORKS
Control Panel – Administrative Tools – Computer
Owner (Owner)
Windows CE
Setting:
disable
Send LM and NTLM
responses
on the MICRO PANEL.
M000174-19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents