File Server Start/Stop; Sample Settings; Access To The Enable; Note For Users Of Newer Windows Versions - Micro Innovations Windows CE Manual

Programs
7.8.3 F S S
ILE ERVER TART
The file server is started by default. The file server must be restarted after registry entries are
changed. The file server can be started and stopped with the program services.exe. The possible
command line calls are listed in the table below:
Functionality
File server restart
Start
Stop
Display status
7.8.4 S S
AMPLE ETTINGS
The settings for the file server can be set as follows in a
[HKEY_LOCAL_MACHINE\Services\SMBServer\Shares\SampleVRoot]
"Path"="\\InternalStorage\\Data"
"Type"=dword:0
"UserList"="AnnD;GladysL"
The registering of the users and the restarting of the file server must be carried out after the registry
keys are set (see also chapter Autoexec.bat):
useradmin.exe -add AnnD -p password1
useradmin.exe -add GladysL -p password2
services.exe refresh SMB0:
7.8.5 A
CCESS TO THE ENABLE
The enable can be accessed from a different device by stating the panel name and the enable name:
e.g. \\MI_xxxxxx\SampleVRoot
Access from a PC is also possible using the IP address of the panel:
e.g. \\192.168.1.1\SampleVRoot
U
7.8.6 N
OTE FOR SERS OF
From Windows Vista
"Send LM & NTLM -- use NTLMv2 session security if negotiated."
Further information is provided in the chapter Name resolution in Windows networks.
Alternatively, this setting can also be changed with the following registry key:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa]
"lmcompatibilitylevel"=dword:00000001
7.8.7 U
SE WITHOUT AUTHENTICATION
When accessing from a panel without authentication, the entry of a user name may nevertheless be
requested. In this case, any user name (e.g. MI_PANEL) can be entered. The next enable access will
then no longer request a user name and the access will function normally. The same procedure
applies after a "disconnect" of the connection.
This strange behavior seems to be a characteristic of Windows CE 5.0. Use without authentication is
therefore not recommended.
64
/S
TOP
Call
Services.exe refresh SMB0:
Services.exe start SMB0:
Services.exe stop SMB0:
Services.exe list
:
N W V
EWER INDOWS ERSIONS
the LAN Manager
REG file (see also chapter Autoexec.reg):
authentication level
Windows CE
must be set to
M000174-19