4.10.3 Misc; Device; Command Line Parameters - Micro Innovations Windows CE Manual

System settings

4.10.3 MISC

4.10.4 D
EVICE
4.10.5 C
OMMAND LINE PARAMETERS
The command line call is described in chapter 4.1. The following parameters are supported:
Parameter Description
-status Display of the current memory setting, see chapter
-storage «n» Setting the storage size as the number of MBytes used for the file system. For
example, '–storage 5' means that 5 MBytes of memory are used for the file
system.
-fullscreen The application is started in full screen mode.
-? or –h Display of the possible parameters
34
The «Misc» tab displays the current temperature on the
device and the operating hours.
Details displays the total operating hours run, broken
down into individual temperature ranges:
Note:
This function is not supported by all MICRO PANEL
devices. The total operating hours or the temperature
histogram are only supported from OS Image Release
2.14.0 (see System properties). The operating hours are
therefore only counted from 2.14.0.
The «Device» tab displays the network name. The
network name can also be set using Netsetup. The device
can be restarted if required after the network name is
changed.
See also chapter Owner.
Windows CE
Memory
M000174-19