File Server; General Settings; Virtual Directory Settings - Micro Innovations Windows CE Manual

Windows CE
7.8 F
ILE SERVER
With Windows CE 5.0 a file server is contained in the device.
Note:
Further information on the functionality of the file server is provided in the Microsoft MSDN
documentation.
7.8.1 G S
ENERAL ETTINGS
The following registry settings control the functionality of the file server (see also chapter Registry
Editor).
Note:
Changes to the registry entries are not active until the next restart of the file server (see
start/stop) of the file server.
The dword entries are in hexadecimal format (see also chapter
Registry entries under [HKEY_LOCAL_MACHINE\Services\Smbserver\Shares]:
Entry Type
UseAuthentication dword
7.8.2

VIRTUAL DIRECTORY SETTINGS

These registry entries contain the mapping between the virtual directories in the file server and the
physical directories on the device.
Note:
Changes to the registry entries are not active until the next restart (see
server.
The dword entries are in hexadecimal format (see also chapter
Registry entries under [HKEY_LOCAL_MACHINE\Services\SMBServer\Shares\«Enablename»]:
Entry Type
Path string
Type dword
UserList string
M000174-19
Description
Set to 1 by default.
If this value is set to 0 (not recommended), the authentication on the file
server is deactivated and all users on the network have access to all
enables.
Observe the instructions of chapter
Description
Specified directory which is enabled.
0 for file enable
1 for print enable (not supported)
Specifies a comma-separated list of authorized users.
These must be created via the
This entry is ignored if UseAuthentication = 0 is set.
Sample settings).
Use without authentication.

File server

start/stop) of the file
Sample settings).
User Administration (UserAdmin).
Programs
File server
63