Date / Time And Time Zone Setting (Datetime); Date/Time; Time Zone - Micro Innovations Windows CE Manual

System settings
4.3 D / T
ATE IME AND
4.3.1 D /T
ATE IME
Month/Year
Day
You can change the month and year using the two buttons stated (<< and >>). You can select the day
directly by touching the day of the month. Hours, minutes and seconds are changed after they are
selected with the buttons shown above. Hours must be entered in 24 hour format. Touching «OK» will
cause the current settings in the clock module to be saved and retained, even in the event of a restart.
Note:
The daylight saving time change is NOT automatic. The year number cannot be set to a lower value
than the current year.
4.3.2 T
IME ZONE
The dialog shown can also be used to set the required time zone. The «GMT» time zone is set by
default, i.e. without a time shift setting. The set time zone is also retained after a restart.
22
T Z S (D
IME ONE ETTING
Hours
T )
ATE IME
Minutes Seconds
Windows CE
M000174-19