Before Using The Remote Control; Inserting The Batteries; Battery Replacement Period And Cautions - Epson EMP-800 User Manual

Before Using the Remote Control

Inserting the Batteries

The batteries are not inserted into the remote control at the time of purchase,
and so you need to insert them before the remote control can be used.
Procedure
1 Remove the battery compartment
cover.
While pushing the catch of the battery
compartment cover, lift the cover up to
remove it.
Insert the batteries.
2
Make sure the polarities of the batteries
are correct.
3 Replace the battery compartment
cover.
Press the battery compartment cover
until it clicks into place.

Battery Replacement Period and Cautions

If the remote control becomes slow in responding or if it stops working, the
batteries may be spent. If this happens, replace the batteries with fresh ones.
Guide to battery replacement period: After about 6 months if the remote control is
used for 30 minutes each day
* The replacement period given above may vary depending on the amount of
usage and the ambient conditions.
Use the following type of batteries as replacements.
2 AA manganese batteries
Catch
13