Dell 966 User Manual page 55

Bluetooth icon appears on the display once the USB Bluetooth adapter is active.
To view or change Bluetooth Default Settings:
1. Press the up or down Arrow button
2. Press the up or down Arrow button
Select button
Bluetooth Default Settings Menu
Menu Settings
item
Bluetooth
On*
Enabled
Off
NOTE: When Bluetooth Enable is set to On, the printer accepts Bluetooth connections and allows the
USB Bluetooth adapter to communicate with other Bluetooth-enabled devices.
Discovery
On*
Mode
Off
NOTE: Set the Discovery Mode to On if you want other Bluetooth-enabled devices to detect the USB
Bluetooth adapter attached to your printer.
Security
Low*
High
Pass Key Specify a pass key. Any external Bluetooth-enabled device needs to enter this passkey before it sends a
print job.
NOTE: You only need to specify a pass key if the Security Level is set to High.
Press the Select button
Trusted
Device-
Clear All
NOTE: Your printer stores a maximum of eight external Bluetooth-enabled devices (trusted devices). When
the printer detects more than eight devices , the least recently used device is removed from the list.
Device The name assigned to the USB Bluetooth adapter. When printing from an external Bluetooth-enabled device,
Name the Device Name or Device Address should be selected.
Device The address of your USB Bluetooth adapter. When printing from an external Bluetooth-enabled device, the
Address Device Name or Device Address should be selected.
NOTE: You cannot change the Device Address.
Paper Press the Select button
Handling
blank paper loaded in the input tray. If you have an optional input tray, you can also specify the paper
source. For more information, see
*Factory default setting
.
to clear the list of Trusted Devices.
to enter the Paper Handling menu, and then select the size and type of the
Paper Handling
to scroll to Setup, and then press the Select button
to scroll to Change Bluetooth Default Settings, and then press the
Menu.
.