Dell 966 User Manual page 81

7. From Discovery Mode , press the left or right Arrow button
8. From Security , press the left or right Arrow button
NOTE:
If the security level is set to High, you need to specify a pass key for the USB Bluetooth adapter. Any
external Bluetooth-enabled device needs to enter this pass key to send a print job to your printer.
9. Press the Back button
Printing from a Bluetooth-enabled Device
1. Make sure the external Bluetooth-enabled device is set up to print to the printer. Refer to the device
documentation for information.
NOTE: Some devices display the USB Bluetooth adapter's name or address. Access the Bluetooth Default
Settings menu to view the name and address of your USB Bluetooth adapter.
2. Insert a USB Bluetooth adapter (sold separately) into the PictBridge port.
NOTICE:
Do not remove the Bluetooth-enabled device or touch the printer near the area of the memory card
or Bluetooth-enabled device while actively printing from Bluetooth. Data corruption can occur.
3. Set Bluetooth Enabled and Discovery Mode to On.
a. From the main menu, press the up or down Arrow button
Select button
b. Press the up or down Arrow button
press the Select button
c. Press the up or down Arrow button
Arrow button
d. Press the up or down Arrow button
Arrow button
e. Press the Back button
4. From your external Bluetooth-enabled device, send the print job to the printer. Refer to the device documentation
for more information.
NOTE: If the security level is set to High, you are required to enter the pass key from the external Bluetooth-
enabled device. The pass key can be changed or viewed in the Bluetooth Default Settings menu. For more
information, see
to save your settings and go back to the previous menu.
.
.
to scroll to On.
to scroll to On.
.
Bluetooth Mode.
to scroll to On.
to choose a security level.
to scroll to Setup, and then press the
to scroll to Change Bluetooth Default Settings, and then
to scroll to Bluetooth Enabled, and then press the left or right
to scroll to Discovery Mode, and then press the left or right