Installing The Power Button Cover - Epson TM-U230 Developer's Manual

Confidential
TM-U230 Developer's Guide

Installing the power button cover

The power button cover is provided to prevent someone from pressing the power button
inadvertently. Install the cover over the printer POWER button as shown in the figure below.
When a power button cover has been installed, insert a ballpoint pen or the like in the holes
provided to turn the printer on and off.
Figure 2-12 Installing the power button cover
WARNING:
Should an emergency arise when the power button is installed, immediately disconnect
the AC cable of the AC adapter from the power outlet. Continued use under these
conditions could result in fire or shock hazard.
Handling 2-13