Epson TM-U230 Developer's Manual page 22

Confidential
Installing the wall mount
CAUTION:
The weight of the printer is listed in the table below. Use screws that are long enough to
properly support the weight of the printer and that suit the type of wall you attach the
mount to. It is recommended that you use screws with a 4 mm diameter.
Secure the mount to the wall using all the 10 screw holes.
Table 1-1 Weight of printer and accessories
TM-U230 printer
AC adapter
Power supply box
TM-U230 printer
Select a location for wall mounting that will provide sufficient space around the printer
when the roll paper cover and cutter cover are open.
Attach the wall mounting bracket using all the 10 screw holes.
Since no screws have been supplied with the wall mounting bracket, select screws that suit
the wall where the bracket is to be attached.
Holes for screws in the
wall mounting bracket
1-14 Installation
Weight
Approx. 3.5 kg
Approx. 2,8 kg
Screw holes in the wall mounting bracket
Holes for screws in the
wall mounting bracket