Attaching Switch Panel For Horizontal Installation - Epson TM-U230 Developer's Manual

Confidential

Attaching Switch Panel for Horizontal Installation

1. Clean the switch panel attached to roll paper cover.
Note:
Do not touch the switch panel surface after cleaning. Touching this surface may lower the strength of
the adhesive.
2. Remove the seal covering the adhesive surface of the switch panel for horizontal installation.
Note:
Do not touch the adhesive surface of the switch panel for horizontal installation. Touching this surface
may lower the strength of the adhesive.
3. Attach the switch panel for horizontal installation on top of the switch panel attached to the
roll paper cover. Press down the switch panel with sufficient force equally across the surface
of the panel.
Attach the switch panel for
horizontal installation on top of
the existing switch panel.
Switch panel attachment
TM-U230 Developer's Guide
Roll paper cover
Installation 1-9