Replacing Roll Paper - Epson TM-U230 Developer's Manual

Confidential

Replacing roll paper

Use the designated type of roll paper. (See Appendix A for information on roll paper
specifications.)
1. Be sure that the power is turned on.
2. Open the roll paper cover.
3. Remove the roll paper and cut the paper along the dotted line in the figure below.
Roll paper cover
4. Press the PAPER FEED button to remove the cut paper.
5. Use a pair of scissors to cut the front end of the paper off squarely.
6. Load the roll paper in the printer. Be sure to note the correct direction that the paper should
come off the roll. (See Figure 2-4.)
7. Hold the front end of the roll paper with both hands and insert the roll paper into the paper
insertion slot as far as it will go. The roll paper is now automatically fed.
Figure 2-2 Cutting roll paper
Figure 2-3 Shape of roll paper front end
TM-U230 Developer's Guide
Cut
PAPER FEED
button
Handling 2-5