Emerson ControlWave EFM 4710A Instruction Manual page 61

There should be clearance for the optional Solar Panel (if required) (the Solar Panel
-
may be mounted to the same 2" pipe that secures the unit.
Power wiring should not be installed until the unit has been mounted and grounded at
-
a designated work site.
I/O wiring, external power wiring, RTD cabling, local comm. port, antenna cable, and
-
network (RS-232 and RS-485) comm. port cabling enter the bottom of the unit though
conduit or special function fittings.
Figure 2-4 - Side View of ControlWave EFM Mounted to a 2" Pipe
CI-ControlWave EFM Installation & Operation / 2-9