Restoring the Machine's Default LAN Settings to Perform Setup Again
Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Use the Easy-Scroll Wheel to select Settings, then
press the OK button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Reset LAN settings, then press the OK button.
5
Select Yes, then press the OK button.
6
Make sure that the screen shown to the right appears.
•
After a while, the LAN settings screen returns.
The LAN setting of the machine is now restored to the default state.
•
Perform setup again by following the procedures in "Wireless Setup" on page 22 and onward in
the printed manual: Getting Started.
<Default State>
Wireless connection
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP setting
Obtain an IP address automatically